OCHA – Hazardous Area Aware in Open Cut Coal Mines

Purpose:

To give learners the skills, knowledge & attitude to
• identify hazardous area's
• identify the explosion-protection aspects of plant and machinery in hazardous area's
• be aware of the requirement of monitoring equipment and plant in the explosion hazardous area's
• report on the integrity of explosion-protected equipment in a hazardous area's
• covering aspects of MDG 28

Course Name: OCHA - Hazardous Area Aware in Open Cut Coal Mines
Course Code: OCHA
Course Duration: 1 Day
Training Plans: Hazardous Area Awareness in Open Cut Coal Mines
Description:

This course consists of National Units of Competency.
At the completion the course, if the learner complies with all the course prerequisites & is deemed competent they will receive a Statement of Attainment for the competencies listed.

Scope

This Competency Standard Unit covers the explosion-protection aspects of plant and machinery operation or maintenance. It requires the ability to visually identify any damage or deterioration of explosion-protected equipment, monitor equipment and plant in relation to changes in the explosion hazard and to follow procedures to limit the risk of an explosion.

Assessment:

• Written assessment

Entry Requirements:

Certificate III Electrical/Electronic's

Qualification Requirements:

Competence in this unit shall be assessed either concurrently with or after competence in Unit, Report on the integrity of explosion-protected equipment in hazardous areas , and competencies in the installation of electrical, electronic, instrumentation and/or data communication equipment and wiring systems have been achieved at AQF 3 or NQF 4 level or equivalent

Equipment and Materials:

The training room is a “clean clothes” area only, enclosed footwear at all times.

Mode of Delivery:

The course is conducted by a qualified trainer and is held at our facilities or yours. Each of our trainer led courses is skill-based and covers a range of certification requirements.

Units of Competence:
CodeUnit NameType
UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area

Protection – Electrical Protection

Purpose:

The types of electrical protection used in underground coal mines
Where the different types of protection are installed in the system
Nominal protection settings
Legislation & Standards

Course Name: Protection - Electrical Protection
Course Code: Protection
Course Duration: 1 day
Training Plans: Electrical Protection
Description:

This course is designed to meet industry requirements; it can be changed in consultation with clients to meet their relevant site requirements.
The course covers the features of electrical protection used in underground coal mines.
No national units of competency are covered.
At the completion of the training the successful learner is issued a “recognition of attendance”

Assessment:

Written

Entry Requirements:

Certificate III Electrical/Electronic's

Qualification Requirements:

Certificate III Electrical/Electronic's

Equipment and Materials:

The training room is a “clean clothes” area only, enclosed footwear at all times.

Mode of Delivery:

The course is conducted by a qualified trainer and is held at our facilities or yours. Each of our trainer led courses is skill-based and covers a range of certification requirements.

Units of Competence:
CodeUnit NameType
protection Electrical Protection

AS/NZS3800 – AS/NZS 3800 Overhaul & Repair of Hazardous Area Equipment – Coal Mines – Gas/Dust Atmospheres

Purpose:

Competence shall be demonstrated in relation to any classified hazardous areas and explosion-protection techniques. This unit shall be endorsed for each technique in which competency is demonstrated.

Course Name: AS/NZS3800 - AS/NZS 3800 Overhaul & Repair of Hazardous Area Equipment - Coal Mines - Gas/Dust Atmospheres
Course Code: AS/NZS3800
Course Duration: 3 Days
Training Plans: Overhaul - All Groups I,II & option of Group III
Overhaul - All Groups I,II,III (Motors)
Overhaul - Groups I,II Exd, Exe
Overhaul - Groups I,II Exi
Description:

This course consists of National Units of Competency.
At the completion the course, if the learner complies with all the course prerequisites & is deemed competent they will receive a Statement of Attainment for the competencies listed.

Scope

This Competency Standard (AS/NZS 4761.1) Unit covers the explosion-protection aspects of overhauling and repairing explosion-protected equipment and the activities required of the responsible person. It requires the ability to establish and document the level of work required, to arrange for the overhaul/repair to be carried out, to verify compliance of overhauled/repaired equipment and to complete the necessary documentation.

Assessment:

• A representative body of work performance
• Written assessment
• Pratcical assessment

Entry Requirements:

Certificate III Electrical/Electronic's

Qualification Requirements:

Certificate III Electrical/Electronic's

Equipment and Materials:

The training room is a “clean clothes” area only, enclosed footwear at all times. Practical assessments may be conducted in a workshop environment, appropriate PPE, including eye protection; high vis clothing & steel capped safety boots may be required.

Mode of Delivery:

The course is conducted by a qualified trainer and is held at our facilities or yours. Each of our trainer led courses is skill-based and covers a range of certification requirements.

Units of Competence:
CodeUnit NameType
UEENEEM031A Overhaul and repair of explosion-protected equipment - coal mining
UEENEEM032A Overhaul and repair of explosion-protected equipment - flameproof enclosures
UEENEEM033A Overhaul and repair of explosion-protected equipment - gas atmospheres
UEENEEM034A Overhaul and repair of explosion-protected equipment - dust atmospheres
UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area
UEENEEM031A Overhaul and repair of explosion-protected equipment - coal mining
UEENEEM032A Overhaul and repair of explosion-protected equipment - flameproof enclosures
UEENEEM033A Overhaul and repair of explosion-protected equipment - gas atmospheres
UEENEEM034A Overhaul and repair of explosion-protected equipment - dust atmospheres
UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area
UEENEEM031A Overhaul and repair of explosion-protected equipment - coal mining
UEENEEM032A Overhaul and repair of explosion-protected equipment - flameproof enclosures
UEENEEM033A Overhaul and repair of explosion-protected equipment - gas atmospheres
UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area
Notes:

UEENEEM034A is an elective units & only covered for those workshops that require it.

NPG Mining customisers each training course to suit your workshop & the equipment you work on.

Explosion techniques that can be covered are
Ex'd, Ex'e, Ex'n, Ex'm, Ex'i, Ex't (Dip), Ex'p, & mixed techniques.

Talk to us about your workplace requirements.

AS/NZS2290 – AS/NZS 2290.1 Introduction Inspection & Maint – For Hazard Area Electrical Equipment for Coal Mines

Purpose:

To give learners the skills, knowledge & attitude to
• report on the integrity of explosion-protected equipment in a hazardous area
• attend to breakdowns in hazardous areas - coal mining
• install explosion-protected equipment and wiring systems - coal mining
• maintain equipment in hazardous areas - coal mining
• conduct testing of hazardous areas installations - coal mining
• conduct visual & detailed inspection of hazardous areas installations - coal mining

Course Name: AS/NZS2290 - AS/NZS 2290.1 Introduction Inspection & Maint - For Hazard Area Electrical Equipment for Coal Mines
Course Code: AS/NZS2290
Course Duration: 3 Days
Training Plans: Maintenance - Group I
Description:

This course consists of National Units of Competency.
At the completion the course, if the learner complies with all the course prerequisites & is deemed competent they will receive a Statement of Attainment for the competencies listed.

Scope

This Competency Standard Unit covers the explosion-protection aspects of plant and machinery operation or maintenance. It requires the ability to visually identify any damage or deterioration of explosion-protected equipment, monitor equipment and plant in relation to changes in the explosion hazard and to follow procedures to limit the risk of an explosion.

Assessment:

• A representative body of work performance
• Written assessment
• Pratcical assessment

Entry Requirements:

Certificate III Electrical/Electronic's

Qualification Requirements:

Competence in this unit shall be assessed either concurrently with or after competence in Unit, Report on the integrity of explosion-protected equipment in hazardous areas , and competencies in the installation of electrical, electronic, instrumentation and/or data communication equipment and wiring systems have been achieved at AQF 3 or NQF 4 level or equivalent

Equipment and Materials:

The training room is a “clean clothes” area only, enclosed footwear at all times. Practical assessments may be conducted in a workshop environment, appropriate PPE, including eye protection; high vis clothing & steel capped safety boots may be required.

Mode of Delivery:

The course is conducted by a qualified trainer and is held at our facilities or yours. Each of our trainer led courses is skill-based and covers a range of certification requirements.

Units of Competence:
CodeUnit NameType
UEENEEM019A Attend to breakdowns in hazardous areas - coal mining
UEENEEM023A Install explosion-protected equipment and wiring systems - coal mining
UEENEEM027A Maintain equipment in hazardous areas - coal mining
UEENEEM038A Conduct testing of hazardous areas installations - coal mining
UEENEEM042A Conduct visual inspection of hazardous areas installations
UEENEEM043A Conduct detailed inspection of hazardous areas installations - coal mining
UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area

Mark McLean

TECHNICAL TRAINER & ASSESSOR

Mark Joined NPG Mining 2017.

(more…)

© 2020 - NPG Mining
RTO: 90854